New Products

Grand Back Check Leather 400mm x 46mm. 1.9mm thick.

Let off Tool for S & S

Boxed set of ivory colour key Coverings, with fronts standard size: 50mm head

Grand double wing springs for grand lever bodies (whippens).

Alcohol burning lamp for casting hammers. Brass with cap.

Let Off Tool. Perfectly fits old and new Steinway regulating screws.

Renner Grand Action Model

Renner Upright Action Model

For insertion of paper punchings when leveling keys. 24cm.

For insertion of paper punchings when leveling keys. 16cm.

Loop cord, Green, 10 Meter length by Renner.

Individual voicing block

Tightly wound with flexible shaft this strong magnetic pick up tool snakes easily into hard to reach areas.

Strip of Red Bushing Cloth 1.2mm for flanges in grand and upright pianos. With glued point for easy threading.

An assorted box of cloth balance rail and baize front rail washers. Ideal for emergency repairs.

Key easing tool with two ends. One end permits easing of the key pin hole without removing the key. The reverse wedge in the other end enables oversize key pin holes to be closed slightly to tighten the key.

V275 Double Head Screwdriver with handle. Ideal for reaching inaccessible screws like Bluthner patent action screws

An assorted box of paper and card balance rail and front rail washers. Ideal for emergency repairs.

A unique portable book holder for upright pianos. The clip provides a secure way to hold your sheet music. No screws or drilling required.

H Flange for Steinway Upright with spring

Designed primarily for regulating the dowel type capstans on Yamaha upright pianos.

The V287 combination regulating 'T' handle allows for greater pressure to be exerted for those difficult situations. The handle is 4'' long and has a 3'' chrome plated shaft and collar.

Thumb held toning tool complete with needles and safety guard.

A standard key dip block to level black and white keys.

10cm of 9mm Red Check felt. (Width of roll 1.50 metres)

Clip on bridle tap inserter. A moulded plastic saddle at the end of the wood shank accepts the brass spring clip for easy insertion of the bridle strap on to the hammer butt.

Celeste Pedal shift lock

Guide Roller for celeste cable.

For insertion of paper punchings when leveling grand keys with the action in place.

This tool works by grasping the string at the speaking length directly behind the agraffe or V bar. By gently tilting the tool backward or forward, one can raise or lower the level of the string. Made from high strength steel

The holding block suspends a ½” rule over a two or three string unison. Pluck the string with the dampers raised, when all the strings vibrate against the edge rule, the strings are level.

Small handy finger held tool with two ends.

The key pounder helps spread out and minimize the stress from key strikes.

Bass string twister for twisting rattling or numb strings.

Balance hole reamer. 2 blades for cleaning and polishing off the balance hole.

Hammer fitting block for filing hammer heads to fit string level.

Single Needle Toning Tool with long handle.

These strongly constructed braked units have four 4 inch single wheeled castors supporting each leg. Weight load 900kg.

CA adhesive super thin glue for penetrating and stabilizing soft wood.

Wrest Pin Box Small, Easy to store and carry wrest pin box for those on the road repairs. Contains 10 pins of each of the 8 most commonly sold blued pins plus assorted nickel pins. Complete with 10 metal bushings and chalk.

Ruck sack style tool case with 5 elastic tool holders,document pouch and large front compartment.

Micro Fibre Piano Cleaning Cloth Use the cloth dry to dust the exterior of your polyester piano. Unlike other cloths, the dust will cling to the fibres and will not spread to other areas. Sold Individually.

Carbon Tuning Lever Handle

An excellent value buttoned vinyl seat adjustable concert stool. Flat packed with detachable legs. Only available in BLACK poly.